ASTM A213 A179 Boiler Tube - Carbon Steel Pipe

.

ASTM A213 A179 Boiler Tube & package picture for your reference.

ASTM A179
ASTM A179 Cold drawn seamless steel tube for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes.

ASTM A179 steel tubes covers minimum-wall-thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus.
ASTM A179 covers tubes 1/8 to 3 in. [3.2 to 76.2 mm], inclusive, in outside diameter.

ASTM A179 Seamless Boiler Tubes, A179M Seamless Cold-Drawn Tube,Low-Carbon Steel Heat-Exchanger and Condenser Tubes,ASTM A179 heat exchange tube

What is ASTM A179/ ASME SA179 ?

Low-carbon steel continuous, minimal wall thickness tubing for condensers, heat exchanger tubes, as well as other heat transfer applications are covered by STM A179. Seamless, cold-drawn low-carbon alloy steel pipe is covered by the ASTM A179 (SA 179) required specifications.

For SA179 heat exchanger tubes, the minimum yield strength is 26 Ksi 180 Mpa, the minimum tensile strength is 47 Ksi 325 Mpa, as well as the minimum stretch is 2 inches or 50 millimeters (about 1.97 in) at 35%.

The elemental composition is as follows: Mn (Manganese) {{0}}.27-0.63 percent, P (Phosphorus) max. 0.035 percent, S (Sulfur) 0.035 percent, and C (Carbon) 0.06-0.18 percent. The ASTM A179 Heat Exchanger Tube is a robust, flexible tubing with long-bearing capabilities.

ASTM A179 Seamless Boiler Tubes


	C			P	S
ASTM A179	0.06-0.18	Less than or equal to 0.25	0.27-0.63	Less than or equal to 0.035	Less than or equal to 0.035

ASTM A179,ASME SA179 Seamless Heat-Exchanger and Condenser Tubes Mechanical Propertie

	ASTM A179
	Greater than or equal to 325
	Greater than or equal to 180
	Greater than or equal to 35
	Less than or equal to 72

ASTM A179,ASME SA179 Seamless Tube Specification:

2.5

3.5

4.5

6.5-7

7.5-8

8.5-9

9.5-10

Φ25-Φ28

●

Φ32

●

Φ34-Φ36

●

Φ38

●

Φ40

●

Φ42

●

Φ45

●

Φ48-Φ60

●

Φ63.5

●

Φ68-Φ73

●

Φ76

●

ASTM A179,ASME SA179 steel tubes are made by the seamless process and shall be cold drawn.

ASTM A179 Seamless Boiler Tubes which are made from the finest and most superior raw materials which we source from our local vendors. The ASTM A179 is a standard which covers specifications for the A179 Tube material in terms of its minimum wall thickness. ASTM A179 Tubes shall be made by the seamless process and shall be cold drawn. Heat and product analysis shall be performed wherein steel materials shall conform to required chemical compositions of carbon, manganese, phosphorus, and sulfur. The steel materials shall also undergo hardness test, flattening test, flaring test, flange test, and hydrostatic test.